Enfig SRWH-W211-NONMOST

Product Features

• This harness is made specifically for Mercedes vehicles where the most fiber optic amplifier is being removed.
• The box allows you to use your factory steering wheel controls with your aftermarket radio. You will need to purchase a SWCL (Steering Wheel Control Lead) to activate this feature since some cars do not have steering wheel controls. (see below)
• The box reads the cars can-bus (data) wires. The following wires are transmitted to the factory radio through the can-bus wires. The small box converts the following wires into analog signals that your aftermarket radio can read.
  Red- Switched power turns the radio on and off with the key and keeps the radio on until you pull the key out of the cylinder.
  Orange- Illumination wire dims radio when you turn on your lights.
  Mint Green- Parking brake wire unlocks security features when your parking brake is engaged.
  Purple with White Stripe- Backup camera reverse wire tells radio to Initiate back-up camera screen when you are in reverse.
  Pink- Vehicle Speed Sense wire tells the radio how fast you are going to improve accuracy especially when you lose GPS or cellular signal.
• This harness is designed to connect directly into some older Blaupunkt brand radios.  If you are not installing a Blaupunkt radio we have a PNP converter that allows you to connect to your new radio without cutting any wires.
• OEM pocket to replace CD changer part number. A 211 683 00 91

Additional Information

• We recommend connecting the RCA cables to the front RCA since the rear RCA do not output phone call audio.