Enfig SRWH-BUC

Enfig SRWH-BUC

Average rating:
average rating 97%
(19)
Provides power to a backup camera when using an Enfig SRWH that has a reverse signal.
$24.99 $24.99 You Save $0.00

Product Features

  • Connects between an Enfig SRWH (smart Radio Wiring Harness) with a reverse signal and an Enfig PNP (Plug and Play Converter).
  • Provides a power and ground for a reverse camera when the car is in reverse.
  • We do not recommend a camera be powered at all times the vehicle is on.  This will shorten the life of the camera.
Average rating:
average rating 97%
19 reviews

Featured positive reviews:

average rating 100%
Wireless Carplay and Backup Camera for Audi B7 10/30/2019
By Greg
Pretty great experience. I wanted to keep my 2006 Audi A4 2.0T Quattro driveable for another couple of years because it has never given me any trouble. Per the wife, that required wireless carplay and a backup camera. Literally plug and play with Enfig's harnesses with no issues - bought a cheap backup camera with dynamic parking lines and led lights and a used Pioneer AVH-W4400NEX head unit from ebay. Only Enfig's wiring is needed to swap old symphony II radio for the new unit, so took about 30m to install the new radio (i guess technically this review is only for the backup camera harness, but i used all the other wiring from Enfig as well), another 2 hours to route the backup camera wire through the trunk and up to the head unit. In total, less than $500 and an afternoon to upgrade a 14yr old car to present day. Christian's advice was spot on, and I would use Enfig again in a heartbeat.
 
Share on FacebookBookmark and Share